簡要描述：單頭注液泵A型系列廣泛應用：生物制劑、制藥、電池、CV、熱管、水劑、香水等液體的精密定量灌裝。Precise quantity filling of liquids such as biological agents, pharmaceuticals, batteries, CVs, heat pipes, liquid agents, perfumes, etc.
產品型號
廠商性質
更新時間
瀏覽次數
相關文章
| 品牌 | 吉克爾 | 產地 | 國產 |
|---|---|---|---|
| 產品新舊 | 全新 |
廣泛應用：生物制劑、制藥、電池、CV、熱管、水劑、香水等液體的精密定量灌裝。Precise quantity filling of liquids such as biological agents, pharmaceuticals, batteries, CVs, heat pipes, liquid agents, perfumes, etc.
產品性能：
l 精密陶瓷閥往復旋轉運行，計量大小通過調節沖程長度。
l 無動態密封件，無易損件，零維修及保養成本。
l 防化學反應與大多數流體都兼容。
l 結構緊湊、部件全不銹鋼、體積小、高精度、耐腐蝕、耐高溫。
l 拆卸安裝方便，可在線清洗，通過閥向正反切換實現。
l 可負壓高溫蒸汽滅菌，適合無菌制劑。
l 單軸步進馬達驅動、高性能、長壽命，高強度可重復運行。
l The precision ceramic valve rotates reciprocally, and the measurement size is adjusted by the stroke length.
l No dynamic seal, no quick-wear parts, zero maintenance and repair costs.
l Anti-chemical reaction prevention is compatible with most fluids.
l Compact structure, all stainless-steel parts, small size, high precision, corrosion resistance and high temperature resistance.
l Easy to disassemble and install and can be cleaned online by switching the valve to the forward and reverse directions.
l It can be sterilized by negative pressure, high temperature and steam.
l Single axis stepper motor drive, high performance, long service life, high strength and repeatable operation.
技術參數 Technical Parameters
| 規格型號 Specification & Model | JKR-DTX-A300µl | JKR-DTX-A800µl | JKR-DTX-A1500µl | JKR-DTX-A3000µl | JKR-DTX-A6000µl | JKR-DTX-A10ml | JKR-DTX-A20ml | |
| 泵閥材質 Pump valve material | 氧化鋁Alumina /氧化鋯zirconia /氮化硅 silicon nitride (可選optional) | |||||||
| 泵套材質 Pump casing material | SUS304/SUS316 (可選optional) | |||||||
| 接觸液體材質 Contact liquid material | 陶瓷Ceramic, SUS316L, PTFE (可選optional) | |||||||
| 驅動方式 Driving mode | 86型單軸步進電機Type 86 single-axis stepper motor | |||||||
| 調量方式 Adjustment mode | 齒輪調節Gear adjustment | |||||||
| 單沖程范圍 Single stroke range | 10-300µL | 20-800µL | 30-1500µL | 50-3000µL | 50-6000µL | 0.5-10ml | 0.5-20ml | |
| 沖程精度 Stroke accuracy | ±1‰ | ±2‰ | ±4‰ | ±5‰ | ±1℅ | ±2℅ | ±3℅ | |
| 沖程轉速 Stroke speed | 18-180r/min | 18-180r/min | 18-180r/min | 18-180r/min | 18-120r/min | 18-100r/min | 18-100r/min | |
| 進液管道 Liquid inlet pipe | Φ4×6mm | Φ4×6mm | Φ6×8mm | Φ6×8mm | Φ6×8mm | Φ6×8mm | Φ8×10mm | |
| 出液管道 Outlet pipe | Φ2.5×4mm | Φ2.5×4mm | Φ4×6mm | Φ4×6mm | Φ4×6mm | Φ4×6mm | Φ6×8mm | |
| 通訊接口 Communication interface | RS232(485 optional), I/O, CC TRIG, AUX OUT | |||||||
| 配制電源 Power supply | 220V/50HZA or 120V/60HZ (optional) | |||||||
| 工作環境 Work environment | Use temperature and humidity 5-40℃, below 85%RH | |||||||
注：以上緊代表型產品，未排列型號有: The above are only representative products, models not listed include
JKR-DTX-A1000µl、JKR-DTX-A2000µl、JKR-DTX-A30ml.
鋰電池手動注液視頻應用
產品分類
上一篇
